Krohne Flow Meters and Krohne Flow Transmitters: Selection Guide for Demanding Fluids

Quick Answer: Krohne flow meters and Krohne flow transmitters are widely specified for corrosive, high viscosity, abrasive, and high pressure process fluids. Silver Automation Instruments supplies equivalent flow meters and transmitters for replacement or new build projects in Southeast Asia, Oceania, Latin America, Africa, and the Middle East. Send your pressure in bar, temperature in °C, pipe size in DN, and flow range for a direct price.

Krohne type instruments show up in oil and gas, water and wastewater, chemical, food and beverage, and marine plants. Engineers often need a faster delivery option or a lower cost replacement that still matches the process connection and output signal. That is where we come in.

Why Krohne Flow Meters Are Common in Harsh Fluid Services

Most process engineers select Krohne flow meters for difficult media. This includes acids, caustic soda, seawater, crude oil, diesel, slurries, and high pressure steam. The sensor materials and liner options handle chemical attack and abrasion. The transmitter converts the sensor signal to a 4-20 mA HART output or a digital bus signal. In practice, a plant may run 10 or 20 of these units on a single process line.

We see similar requirements every week. A customer in Vietnam needed a DN100 electromagnetic flow meter for a seawater intake line. The old Krohne type unit had a damaged electrode. We supplied a PTFE lined model with 4-20 mA HART output in 14 days. The shutdown did not need to be extended.

Krohne Flow Transmitter Outputs and Replacement Options

Krohne flow transmitters usually output 4-20 mA HART, Modbus, or pulse. Some models include totalizer functions and data logging. If your transmitter is dead but the sensor body is still good, you may not need a full flow meter. We can quote a replacement transmitter with the same output and mounting pattern.

Here is the thing. Many buyers send us only the brand name and expect a direct match. That is not enough. We need the tag plate data, fluid type, conductivity, viscosity, pressure, temperature, and line size. With these details we can confirm whether a Silver Instruments electromagnetic flow meter, Coriolis mass flow meter, or vortex flow meter fits.

Flow Meter Model Selection by Fluid and Application

For conductive liquids above 5 µS/cm, an electromagnetic flow meter is often the right choice. This covers wastewater, seawater, acids, and slurries. Silver Instruments supplies DN10 to DN2000 sizes with PTFE, PFA, or rubber liners.

For high viscosity oils, syrups, and pastes, a Coriolis mass flow meter measures kg/h directly. It ignores changes in viscosity and density. We have supplied Coriolis meters for a paint manufacturer in Southeast Asia for solvent and resin batching. Flow ranges start from 0.5 kg/h to 30,000 kg/h.

For steam and compressed air, a vortex flow meter works well. It has no moving parts and handles temperatures up to 350 °C. For diesel, fuel oil, and lubricants, an oval gear flow meter gives repeatable batch control at low cost. A thermal mass flow meter is better for biogas and flare gas because it reads mass flow without pressure compensation.

Most engineers skip this part during first enquiry. They ask for a Krohne flow meter price without listing the fluid. We cannot size a meter without knowing the process. Send us the fluid, pressure in bar, temperature in °C, pipe size in DN, and flow range in kg/h or m3/h. That is enough for a first pass quote.

Pressure Transmitters and Paperless Recorders for the Same Loop

Many Krohne flow meters sit on lines with pressure transmitters and paperless recorders. We supply 4-20 mA HART pressure transmitters with ranges from 1 bar to 1000 bar. ATEX Zone 1 and Zone 2 options are available for gas and chemical plants. Paperless recorders accept 2 to 32 channels and log data for batch or custody transfer.

Last year an oil and gas service company in the Middle East bought five pressure transmitters and two paperless recorders for a well test package. They needed the 4-20 mA HART signal to match an existing Krohne flow transmitter loop. We calibrated the units before shipment.

Contact Silver Automation Instruments for a Quote

We are Silver Automation Instruments. We are not an authorized Krohne distributor. We supply our own flow meters and transmitters that often work as direct replacements. Our main customers are industrial end users and resellers in Southeast Asia, Oceania, Latin America, Africa, and the Middle East.

Send us your process data. Include pressure in bar, temperature in °C, pipe size in DN, flow range in kg/h or m3/h, and the existing output signal. We will reply with a recommended model and price.

Tel: +86-25-68650347
WhatsApp: +86-25-52155837
WeChat: +86 15365082610

FAQ: Krohne Flow Meters and Krohne Flow Transmitters

Can Silver Instruments supply a direct replacement for a Krohne flow meter? Yes. Send the tag plate data, fluid, pressure, temperature, and pipe size. We will match the liner, electrode, process connection, and output signal.

Do you supply Krohne brand flow meters? No. We are not an authorized Krohne distributor. We supply Silver Instruments flow meters and flow transmitters with compatible performance.

Which flow meter type replaces a Krohne electromagnetic meter on a seawater line? Use an electromagnetic flow meter with PTFE liner and titanium or hastelloy electrodes. We supply DN10 to DN2000 models with 4-20 mA HART output.

What information is needed for a price? Fluid name, conductivity in µS/cm for electromagnetic meters, viscosity in cP for Coriolis or oval gear meters, pressure in bar, temperature in °C, pipe size in DN, and flow range.

Do you ship to Southeast Asia, Australia, Latin America, Africa, and the Middle East? Yes. We ship by air and sea. Lead time for standard models is 7 to 15 days. Custom calibrations may take longer.

『SILVER Official Website SERVICE』