『Flow Meter Nước Giá Bao Nhiêu: Bảng Báo Giá Đồng Hồ Đo Lưu Lượng Nước Công Nghiệp Mới Nhất』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Industrial Water Flow Meter Price Guide for Vietnam, Southeast Asia, and Export Buyers
Quick Answer: An inline electromagnetic water flow meter for clean water in DN50 typically costs between 420 USD and 850 USD ex works China. A clamp-on ultrasonic flow meter for temporary measurement starts near 650 USD. For a DN100 wastewater magmeter with 4-20 mA HART and RS485, expect 900 USD to 1,800 USD depending on liner material and ATEX approval.
What Industrial Water Flow Meters Cost in 2025
Most plant teams ask for a single number first. The honest answer is a range, not a fixed price. In practice, a DN25 stainless steel electromagnetic flow meter for a food plant may cost 500 USD. The same DN25 meter with PTFE liner and tantalum electrodes for acid dosing can reach 1,200 USD. Price shifts with wetted material, output type, and compliance.
We have seen customer sites in Vietnam and Indonesia order 20 units of DN80 water meters for pump stations. The unit price dropped from 760 USD to 610 USD because of quantity and combined shipping to Hai Phong port.
Electromagnetic Flow Meter Price by Pipe Size
Electromagnetic meters are the default for conductive water and wastewater. They do not need moving parts and they handle solids. A standard rubber liner works for clean water and sewage. For temperatures above 80 °C, PTFE liner is safer.
Common price ranges from Silver Instruments are as follows. DN15 inline magmeter with 0.5 percent accuracy costs 380 USD to 600 USD. DN50 meter costs 420 USD to 850 USD. DN100 meter costs 750 USD to 1,400 USD. DN200 meter costs 1,100 USD to 2,200 USD. DN300 and larger are quoted case by case because flange rating and liner choice change the cost fast.
A DN100 electromagnetic flow meter with RS485, 4-20 mA HART, and IP68 remote sensor is often specified for bore water and well fields in Australia and Nigeria. That version usually lands near 1,300 USD to 1,700 USD before freight.
Ultrasonic Water Meter Price Ranges
Clamp-on ultrasonic flow meters suit temporary flow surveys and large pipes where cutting the line is expensive. A basic clamp-on portable unit starts around 650 USD. A fixed wall-mount clamp-on system with data logging can reach 2,000 USD. For desalination plant seawater service, we suggest corrosion-resistant transducers and a site calibration check.
Inline ultrasonic water meters for chilled water and HVAC are common in Ho Chi Minh City commercial buildings. DN65 versions with battery power and Modbus output cost 450 USD to 900 USD. Because these meters have no moving parts, maintenance is low. But they need a straight run upstream and downstream to stay accurate.
Vortex, Oval Gear, and Thermal Mass Meters for Water Systems
Vortex flow meters work for high temperature water and steam. A DN50 vortex meter with PT100 temperature compensation for saturated steam costs 700 USD to 1,300 USD. For boiler feed water, users often choose a vortex meter and a pressure transmitter on the same line.
Oval gear flow meters handle clean water, demin water, and diesel. They are not ideal for raw sewage because particles can jam the gears. A small oval gear meter for demin water in a food plant starts near 380 USD. A larger DN40 oval gear meter with pulse output may cost 650 USD to 1,000 USD.
Thermal mass meters are not used for liquid water. They are built for air, biogas, and nitrogen. Buyers with water systems sometimes need air flow meters for blowers and aeration. A thermal mass meter for aeration air in a wastewater plant costs 800 USD to 1,800 USD depending on line size and probe length.
A paint manufacturer in
_600x400.jpg)
Flow Meter Nước Giá Bao Nhiêu: Price Factors for Vietnam Buyers
Vietnamese buyers often search the phrase Flow Meter Nước Giá Bao Nhiêu or Bảng Báo Giá Đồng Hồ Đo Lưu Lượng Nước Công Nghiệp Mới Nhất when they compare supplier prices. The main cost factors are the same in every market. Pipe size, liner material, electrode material, output signal, and local certification drive the price. Import duty and freight from Shanghai, Shenzhen, or Nanjing also matter.
Last year a customer in Da Nang asked for a seawater flow meter for a desalination pilot plant. The inquiry included DN40 pipe, 4 to 20 mA output, and conductivity near 50,000 µS/cm. We quoted an electromagnetic meter with titanium electrodes and PTFE liner at 960 USD. A standard carbon steel meter would have failed within months in that service.
For clean water in high-rise buildings, buyers often choose a battery-powered ultrasonic water meter with LoRa or NB-IoT output. Those units cost 350 USD to 750 USD depending on communication module and pressure rating.
How to Request a Quote Without Delays
Here is the thing. Most RFQ emails are too vague. Saying we need a water flow meter does not tell us the liner or the output. Engineers skip this part and then wait two extra days for questions.
A complete inquiry should include pipe size (DN), fluid type, conductivity for magnetic meters, flow range, pressure (bar), temperature (°C), output signal, power supply, and mounting style. If the area is hazardous, state ATEX Zone 1 or Zone 2. If the meter will run on a bore pump, send the start-stop duty cycle too.
For a wastewater plant in Southeast Asia, we often receive data like this. DN150, raw sewage, 15 to 150 m³/h, 4 bar, 35 °C, 24 V DC, RS485 Modbus, IP68 sensor. That inquiry moves to quotation in one working day.
Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. Contact Silver Automation Instruments on Tel +86-25-68650347 or WhatsApp +86-25-52155837. WeChat is +86 15365082610. We supply meters to Vietnam, Thailand, Indonesia, Australia, Mexico, Kenya, and the Middle East.
Five Questions Buyers Ask Before Ordering
Question 1. Why is a DN100 water flow meter more expensive than a DN50 meter?
The sensor body, flanges, and coil size increase with pipe diameter. Larger meters use more stainless steel and heavier shipping. The electronics are the same, but the sensor cost dominates.
Question 2. Can one flow meter measure both clean water and wastewater?
Yes, if the liner and electrodes match the fluid. Rubber liner and stainless steel electrodes work for many wastewater applications. For chemicals or seawater, we switch to PTFE or PFA and titanium or hastelloy.
Question 3. Do I need 4-20 mA HART or Modbus?
Most plants use 4-20 mA for the control loop and Modbus or HART for settings and diagnostics. A meter with both outputs costs more but avoids adding a signal converter later.
Question 4. How long does delivery take to Vietnam or Indonesia?
Standard models ship in 5 to 10 working days. Custom liners, high pressure flanges, or hazardous area certificates add one to two weeks. Sea freight to Hai Phong or Jakarta normally takes 7 to 12 days.
Question 5. Can Silver Instruments offer local service and calibration?
We support via WhatsApp, WeChat, and email. We also work with local partners in several countries for on-site commissioning and calibration.
Hot Product
Related AD
