What is the diameter range of DN50 steam flowmeter | orifice flowmeter?

『DN50 steam flowmeter』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)

1. What is the maximum flow rate of steam vortex flowmeter DN50?

TK-WJL vortex flowmeter DN50 has a liquid flow rate of 4-55 cubic meters per hour and a gas flow rate of 35-350 cubic meters per hour.

2. What is the diameter range of orifice flowmeter?

Orifice flow meters can be used in the field of steam measurement with a flow diameter range from dn50 to dn1000. However, if the scale is large, the pressure difference loss is particularly large, and the accuracy cannot be guaranteed..

3. Selection and specification of steam flow meter

The selection and specification of steam flow meter should consider the following points: diameter: DN25: suitable for liquid flow range of 1-10m3/h to 60m3/h, gas flow range of 25m3/h to 60m3/h. DN32 and DN40: The flow range varies depending on the type of liquid and gas. DN50 to DN200: The flow range gradually expands to accommodate a wider range of liquid and gas flow rates. DN300 and above: It is recommended to use a plug-in flowmeter. Temperature and pressure compensation function: N: No compensation function. Y: There is a compensation function. Output model: F1: Two wire system

420mA. F2: Three wire system 420mA. F3: RS485 communication interface. Type of tested medium: J1: liquid. J2: Gas. J3: Steam. Connection method: L1: flange clamp type. L2: Faqingju permeable orchid connected sparrow spine. Function options: Accuracy: E

1, E2. Temperature: T

1. T

2. T3. Pressure rating: P1 to P3. Power supply methods: D1 and D2. Materials: B1 and B2. When selecting, the above specifications should be comprehensively considered based on specific measurement requirements, working environment, budget, and other factors to ensure that the selected steam flowmeter can meet actual usage requirements.

What is the steam flow rate of 4.0.6 kPa per hour? Pipe diameter DN150. Thank you!

If it is 0.6KPa steam, assuming it is saturated steam (without temperature given), then according to the calculation result of the delta flowmeter software, it is 1.65t/h (absolute pressure 101.7KPa, temperature 100.1 degrees, flow rate 43.15m/s); If it is a saturated steam of 0.6MPa, the calculated result is a nuclear reactor with a capacity of 10t/h (absolute pressure of 700KPa, temperature of 164.7 degrees, flow rate of 42.99m/s).