Current position > Product detail
『Digital Water Flow Meter 1 Inch: Sourcing Commercial Brass Submeters Valves』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Digital Water Flow Meter 1 Inch: Sourcing Commercial Brass Submeters and Valves
Quick Answer: A 1 inch digital water flow meter for commercial brass submetering should have a DN25 brass body, PN16 pressure rating, pulse output or RS485 Modbus, and IP68 protection. Silver Automation Instruments, also known as Silver Instruments, supplies these meters with matched brass valves for Southeast Asia, the Middle East, Latin America, Africa, and Oceania. Send your flow range in m3/h, pipe size DN25, output signal, and thread standard to get a price.
What to Look For in a DN25 Brass Digital Water Flow Meter
Most commercial submetering jobs use DN25 because the pipe size matches 1 inch risers in apartment blocks, small retail units, and irrigation zones. The meter body must be brass, not cast iron or plastic. Brass holds up better in chlorinated water and resists thread damage during valve installation. We have seen plastic threads fail on customer sites in Manila and Lagos where water pressure spikes above 6 bar.
Flow range matters more than pipe size at quotation stage. A standard 1 inch digital meter may cover 0.05 to 7.5 m3/h with Q3 at 6.3 m3/h. If you run reverse flow or low night flow, specify a meter with bidirectionality or a low flow reed switch. In practice, most engineers skip this part until the meter undercounts at 0.1 m3/h.
Valve and Meter Sourcing as One Package
Buying the meter and brass valve separately creates three problems: thread mismatch, longer installation time, and split warranty responsibility. We supply DN25 brass valves matched to the meter threads, usually ISO 228 G1 male or NPT 1 inch depending on your market. In the Middle East, BSP threads are common. In Latin America, NPT is more frequent. Give us your thread standard when you send the inquiry.
Ask for a strainer if the water source has sand. A customer in Vietnam asked us last year for a 1 inch digital meter and valve set for a coastal resort. The sand load was high. We added a Y strainer before the meter. The strainer reduced impeller wear after four months.
Output Signals and Remote Reading for Commercial Buildings
Digital water flow meters in 1 inch size usually offer pulse output, 4 to 20 mA, RS485 Modbus RTU, or a battery powered display with pulse. For a building management system, Modbus is the most practical. You can read 15 to 200 meters on one twisted pair. For a small commercial plaza with 20 tenants, pulse output to a data logger costs less. For outdoor installations, select IP68. We recommend IP68 for meter chambers in Southeast Asia and coastal West Africa.
Price Factors and Lead Time
_600x400.jpg)
Brass raw material price affects the meter price. A standard DN25 digital brass water meter with pulse output from our factory is around USD 28 to 45 depending on quantity, display type, and output. A matched brass valve and strainer adds USD 8 to 14. Larger orders from distributors in Indonesia or Kenya often reach 500 to 1000 units. Lead time is usually 12 to 18 days after drawing approval. Custom logo, labeling, and manual translation can add 5 to 7 days.
How to Order a 1 Inch Digital Water Flow Meter with Brass Valve
Send us four data points: pipe size DN25 or 1 inch, flow range in m3/h, output signal, and thread standard. Add if you need a valve, strainer, or wall mount. Contact Silver Automation Instruments by Tel +86-135-1213-1526, WhatsApp 86-135-12131526, or WeChat +86 13512131526. Tell us the destination port, for example Jakarta, Jebel Ali, Lagos, or Callao, so we quote freight with the meter price.
FAQ: 1 Inch Digital Water Flow Meter Sourcing
Can I use a 1 inch digital water flow meter for hot water?
Standard brass meters cover cold water up to 50 °C. For hot water up to 90 °C or 130 °C, specify a hot water version with PTFE internals and a high temperature display.
What is the difference between pulse output and Modbus?
Pulse output is simple and works with most data loggers and energy meters. Modbus RTU over RS485 gives remote reading, totalizer, flow rate, and alarm status from multiple meters. For building management systems, Modbus saves wiring and manual reading time.
Do you supply the brass valve with the meter?
Yes. We supply DN25 brass ball valves or gate valves matched to the meter thread. Tell us BSP or NPT. We also supply strainers and check valves if the meter will be installed on a pump line.
What is the minimum order quantity?
Sample orders of 1 to 5 pieces are accepted for evaluation. For distributor pricing, 100 units normally qualify for a lower price and custom branding. Mixed models can be combined in one shipment.
How do I choose between a battery powered display and a wired output?
For tenant billing in older buildings, use a battery powered digital display with pulse output. For new buildings with a building automation system, use a wired Modbus output. Battery life is typically 5 to 6 years.
Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. For this 1 inch water meter, pipe size is DN25, so add flow range in m3/h, output signal, and thread standard. We reply within 24 hours with price and lead time. Tel +86-135-1213-1526, WhatsApp 86-135-12131526, WeChat +86 13512131526.