Current position >About Us
1. Purchase of Doppler Ultrasonic Flow Meter
2. How much does an Ultrasonic Electromagnetic Flow Meter cost per unit
The price range of Ultrasonic Electromagnetic Flow Meter is large, and the core influencing factors include brand, specifications, functions, range caliber, etc. The specific price range is from 285 yuan to tens of thousands of yuan Price reference for mainstream products on sale - Basic universal type: such as spot wholesale ultrasonic water meter, priced at about 285 yuan/unit, suitable for measuring water flow in conventional small-diameter pipelines - High cost-effective industrial type: spot universal ultrasonic electromagnetic flowmeter, priced between 180-2250 yuan/unit - Anti corrosion customized type: intelligent electromagnetic flowmeter for wastewater slurry and sewage scenarios, DN50/100 specification, priced at about 379.5 yuan/unit - Imported brand type: US Weidun VTON imported model, DN1-1000 full specification coverage, priced at 1760 yuan/unit - High precision explosion-proof type: fixed external clamp wall hanging explosion-proof model, can measure liquids, gases, and oils, priced at about 1121 yuan/unit 2 The price influencing factors indicate that the functional differences of different products will significantly affect the selling price: models with remote digital display, anti-corrosion and explosion-proof, large caliber customization, and imported brands will be several times more expensive than the basic model. If you need an accurate quotation, it is recommended to directly contact the corresponding manufacturer or distributor for confirmation.
3. Is there a requirement for the insertion depth when installing the Cologne ultrasonic flowmeter?
There are clear requirements for the insertion depth of the probe when installing the Cologne ultrasonic flowmeter, and it must be strictly operated according to the specifications. 1 The determination of insertion depth is mainly determined by the diameter of the pipeline, and the larger the diameter, the deeper the insertion depth. Small pipe diameters (such as below DN100) are usually inserted by a few centimeters, while large pipe diameters (such as above DN1000) may need to be inserted by more than ten centimeters or even deeper.
2. Core installation requires that the probe must reach a stable flow velocity area near the center of the pipeline to ensure that the average fluid flow velocity is captured. Insertion too shallow or too deep can cause measurement errors and even damage to the sensor. 3. Specific operating specifications vary depending on the insertion depth of different models, and the installation manual provided by the manufacturer must be strictly followed. Cologne will provide specific insertion depth values, calculation formulas, or installation positioning templates for each model. Special tools should be used for accurate positioning during installation, and signal strength and quality indicators should be used to verify whether the installation position is qualified after installation.
4. What are the top ten flowmeter manufacturers?
According to the industry information updated on February 9, 2026, the list of the top ten flowmeter manufacturers is as follows:
1. Emerson belongs to Emerson Electric (China) Investment Co., Ltd., which has top-notch technology in the fields of oil and gas trade handover and multiphase flow measurement. Its products meet the highest internati